The GIPRO X-Type.....fast, accurate, compact!
The all new GIpro-X from HealTech Electronics Ltd. is the third GIpro variant in the range. This Gear Position Indicator will fit all Harley-Davidson (and Buell) motorcycles with an electronic speedometer (either analog or digital readout).
(For bikes with cable driven speedometer or that for some reason DO NOT HAVE a working speed sensor, use the GIPRO X-Type with Wheel Speed Sensor (WSS Kit)
Due to a modern processor and sophisticated firmware, the GIpro-X offers faster and more reliable readings than competitive products. Same size as the GIpro-DS this is also the smallest, most compact gear indicator on the market, making it easy to mount at the instrument cluster. Just the perfect size. It has a clear front face which goes along nicely with the factory instruments.
The product has Red, Blue, Green, Yellow, or White LED display (Green, Yellow and White by special order only, lead time 2 weeks).
NOTE: Red and blue are brightest and easiest to see in direct sunlight.
Unit dimensions: 20mm wide by 30mm tall by 15mm deep (8/10 inch by 1 1/8 inch by 5/8 inch)
The model is auto learning, there are no buttons and no programming wires. Just go through the gears and you are done. (see user guide)
Programmable Shift Light function as well as High Speed Warning feature is included. You won't find this feature set in other products.
The product is rugged, 100% weatherproof and comes with 2-years replacement warranty.
Installation?...pretty dang simple...
HealTech makes bike specific looms to make the installation quick and simple. This kit is "semi-universal" meaning that it requires one wire to be spliced (rpm signal) but the speedo sensor wire is plug-and-play! Follow these steps:
1) Locate the speed sensor. Plug the GIPRO-X speed pickup wire inline. If you have a SpeedoHealer installed, you have to connect the plugs in-line in the following order: Speed sensor male plug >> GIpro >> SH >> bike female plug.
2) Locate the ECU (Engine Control Unit) box. Usually under the seat or a side fairing. Find the tach signal wire (different by model...see bike-specific installation instructions for wire color directions)
3) Just go through the gears (see user guide for instructions) and you are done. Note that HealTech suggests doing this with a WARMED UP engine.
Don't have a dash area to mount the GIPro on your bike? We also sell a chrome or anodized black billet GIPro bar mount for just $59.90. Fits 7/8 to 1 inch bars.
-Each unit is extensively tested, and comes with a 30-day money back guarantee if for any reason it fails to meet your expectation (All parts must be returned in original condition), and a TWO YEAR replacement guarantee (The product should not be damaged or subjected to over-voltage.
HARLEY DAVIDSON Big Twin models with 5 spd. (1998-2006), ALL with Marelli or VDO ign. (ALL years
BUELL 1125R/CR (2008-2010)
GPX-U01 Fits (Universal splicing harness, not a plug and tap kit):
HARLEY DAVIDSON Big Twin models with 6 spd. (2007-2015), ALL VRSC models (e.g. V-Rod) (ALL years)
XB12STT Lightning Super TT (ALL years), ALL with digital trip/odo (ALL years)
GPX-WSS Fits (This comes with a wheel speed sensor, not a plug and tap kit):
HARLEY DAVIDSON ALL with cable speedo (ALL years)
BUELL 1190RS / RX / SX (ALL years), AX (2015), ALL with cable speedo (ALL years)