UA-75297209-1 Healtech Gear Indicator Pro "GIPro" X-Type :: Plug-N-Tap Kits for almost any bike built!
GIPro X-Type G2 for Harley-Davidson and Buell

GIPro X-Type G2 for Harley-Davidson and Buell

Your Price: $119.99
Part Number:GPXT-

Choose Options

Select Color
Select Harness
GIPro Gear Indicator rated 5 stars by Motorcyclist Magazine

The GIPRO, accurate, compact!

New G2 kit includes: Touch Control & Auto Brightness!

The GIpro-X from HealTech Electronics Ltd. is the third GIpro variant in the range. This Gear Position Indicator will fit all Harley-Davidson (and Buell) motorcycles with an electronic speedometer (either analog or digital readout). 
(For bikes with cable driven speedometer or that for some reason DO NOT HAVE a working speed sensor, use the GIPRO X-Type with Wheel Speed Sensor (WSS Kit)

Due to a modern processor and sophisticated firmware, the GIpro-X offers faster and more reliable readings than competitive products. Same size as the GIpro-DS this is also the smallest, most compact gear indicator on the market, making it easy to mount at the instrument cluster. Just the perfect size. It has a clear front face which goes along nicely with the factory instruments. 

The product has Red, Blue, Green, Yellow, or White LED display (Green, Yellow and White by special order only, lead time 2 weeks).
NOTE: Red and blue are brightest and easiest to see in direct sunlight.

Unit dimensions: 20mm wide by 30mm tall by 15mm deep (8/10 inch by 1 1/8 inch by 5/8 inch)

The model is auto learning. Just go through the gears and you are done. (see user guide)

Programmable Shift Light function as well as High Speed Warning feature is included. You won't find this feature set in other products.

The product is rugged, 100% weatherproof and comes with 2-years replacement warranty. 


Installation?...pretty dang simple...
HealTech makes bike specific looms to make the installation quick and simple. This kit is "semi-universal" meaning that it requires one wire to be spliced (rpm signal) but the speedo sensor wire is plug-and-play! Follow these steps:

1) Locate the speed sensor. Plug the GIPRO-X speed pickup wire inline. If you have a SpeedoHealer installed, you have to connect the plugs in-line in the following order: Speed sensor male plug >> GIpro >> SH >> bike female plug.

2) Locate the ECU (Engine Control Unit) box. Usually under the seat or a side fairing. Find the tach signal wire (different by model...see bike-specific installation instructions for wire color directions) 

3) Just go through the gears (see user guide for instructions) and you are done. Note that HealTech suggests doing this with a WARMED UP engine.


Don't have a dash area to mount the GIPro on your bike? We also sell a chrome or anodized black billet GIPro bar mount for just $59.90. Fits 7/8 to 1 inch bars.
GIPro Mount

More questions? Visit our Technical Knowledge Base to read some common questions and answers on Healtech products.

-Each unit is extensively tested, and comes with a 30-day money back guarantee if for any reason it fails to meet your expectation (All parts must be returned in original condition), and a TWO YEAR replacement guarantee (The product should not be damaged or subjected to over-voltage.

GPX-HA1 Fits: 
HARLEY DAVIDSON Big Twin models with 5 spd. (1998-2006), ALL with Marelli or VDO ign. (ALL years
BUELL 1125R/CR (2008-2010) 

GPX-U01 Fits (Universal splicing harness, not a plug and tap kit)
HARLEY DAVIDSON V-Rod Models (2008-2017), Big Twin models with 6 spd. (2007-2015), ALL VRSC models (e.g. V-Rod) (ALL years)

BUELL XB12STT Lightning Super TT (ALL years), ALL with digital trip/odo (ALL years) 

GPX-WSS Fits (This comes with a wheel speed sensor, not a plug and tap kit)
HARLEY DAVIDSON ALL with cable speedo (ALL years) 

BUELL 1190RS / RX / SX (ALL years), AX (2015), ALL with cable speedo (ALL years) 

Updated: 03/2019
5 Stars
Installed on a Buell Firebolt
I ordered the GIPro X-Type with the Harley-Davidson harness. If you have a 2008+ Buell, then order the universal harness. The electrical connections are different than the ones that come with the Harley harness. You'll just end up cutting them off. The good news is that Healtech has awesome customer service. They are right on top of their game. I sent them the wiring diagram for a 2008 Buell XB12R Firebolt and they emailed me back with the changes that need to be made to the harness to attach it to my Buell. I haven't had time to program is because of the continues winter weather in Michigan.
Did you find this helpful?  2 of 2 Found Helpful
Reviewed by: (Verified Buyer)  from Saginaw, MI. on 3/16/2014

Recently Viewed Items